Indoor Air Quality Monitoring

Indoor pollution is more serious than outdoor

The World Health Organization's "Indoor Air Pollution and Health" pointed out that the current level of indoor air pollution is 5-10 times higher than outdoor pollution, and 4% of global diseases are related to indoor air quality, and about 2 million people die prematurely each year from diseases caused by indoor air pollution.Nearly half of the world's people are exposed to indoor air pollution, which has become one of the top ten threats to human health.

Generally speaking, according to the characteristics of pollutants, we can divide indoor air pollutants into biological pollution, physical pollution and chemical pollution.

1. Biological pollution

sensor for IAQ Indoor Air Quality MonitoringThere are many sources of biological pollutants in the air, for example: allergenic substances such as pollen, dust mites, animal dander.

Our or pet hair and dander can easily appear on the seemingly clean carpets, sofas, and bedding in your home. If not cleaned in time, it will breed the dust mites.

In addition, bacteria are also typical biological contamination; we all know that humid environment is easy to breed bacteria. Home bathrooms, kitchens, shaded balconies are actually places where bacteria like to grow. Not only do these bacteria stick to surfaces, but as the indoor air moves, some are also spread throughout the air in the room.

Indoor Air Quality Monitoring

2. Physical pollution

ZH07 PM2.5 dust Sensor

ZH07 PM2.5 Sensor

Physical pollution in household air usually refers to particulate pollution, such as dust, smog and droplets, of which the most widely known is PM2.5.

PM2.5 sensor (ZH07 ) has good consistency, real-time response, accurate data, low power consumption, and the minimum resolution particle diameter is 0.3μm

Indoor Air Quality Monitoring

3. Chemical pollution

Mainly refers to formaldehyde. Formaldehyde is not limited to new houses. In addition to decoration, there are also waterproof floor mats, children's anti-collision cushions, tables and chairs, sofa fabrics, textiles, and even food preservatives.

Even if it's not a new house, many wood-based panels will slowly release formaldehyde for 3 to 15 years after renovation. Especially in a room with heating or air conditioning, as the temperature in the room increases, formaldehyde is more likely to volatilize. If the windows are not opened frequently, the indoor air environment at this time is very unfavorable for us.

ZE08K-CH20 formaldehyde sensor module

ZE08K-CH20 formaldehyde
sensor module

Winsen formaldehyde sensor module (ZE08K-CH20) protects your living environment from formaldehyde pollution day and night. It has low power consumption, high precision, and excellent linear output, which is specially used for indoor formaldehyde detection.

Particulate matter and formaldehyde are the most important pollutants in indoor air pollution, they not only affect our respiratory health, but also cause bronchitis and other lung diseases. As people pay more and more attention to health, many people will choose fresh air systems or air purification equipment to reduce indoor air pollution.

General air purification equipment mainly uses PM2.5 sensors and formaldehyde sensors to detect the concentration of indoor dust and formaldehyde. Once abnormal changes in concentration are monitored, air purification will start to work. Therefore, the quality of the sensor directly affects the final air quality detection value, which plays a crucial role in control.

Indoor Air Quality Monitoring

Indoor carbon dioxide pollution that cannot be ignored

When summer arrives, in order to cool down, many people will stay in air-conditioned rooms with doors and windows closed. After a long stay. There is a feeling of suffocation and drowsiness, which is an "adverse reaction" caused by the high concentration of carbon dioxide in the room.

After sleeping in an air-conditioned room with doors and windows closed for one night, the carbon dioxide in the room exceeded 3000ppm in the morning. 8 times as much as indoors.

According to the "Indoor Air Quality Standards", the daily average of carbon dioxide should not exceed 0.1%, and the concentration of carbon dioxide should always be lower than 1000ppm. If there are many people gathered indoors and the air is not ventilated, the oxygen content in the air will gradually decrease, and a large amount of carbon dioxide will be produced at the same time, and the indoor people will have different degrees of poisoning symptoms. High carbon dioxide levels can directly lead to poor sleep quality, malnutrition, and delayed development of infants and young children.

Using Winsen CO2 sensor to improve indoor air quality

gas sensor for Indoor Air Quality MonitoringFirst of all, to prevent carbon dioxide from exceeding the standard, we need to know the amount of carbon dioxide in the environment. In a crowded room, it is necessary to monitor the carbon dioxide concentration in real time, and then take corresponding ventilation measures according to the monitoring results. The monitoring equipment is realized by the CO2 sensor.

In the smart home, the ventilation system can already be automatically controlled by the built-in CO2 sensor. Once the indoor carbon dioxide content exceeds the standard, the fresh air system can be turned on, exhaust indoor dirty air and introduce filtered outdoor fresh air to maintain good indoor air quality at all times.

Indoor Air Quality Monitoring

MH-Z19C NDIR CO2 sensor

MH-Z19C NDIR CO2 sensor

Winsen MH-Z19C infrared CO2 sensor air chamber is gold-plated, waterproof and anti-corrosion. With its good selectivity, no oxygen dependence, anti-interference, it is widely used in air quality monitoring, fresh air system, air purification equipment, smart home, etc.

Air quality

RELATED PRODUCTS

Air quality sensor module CO2 sensor Formaldehyde sensor Temperature and humidity sensor Dust sensor VOC

Flat Semiconductor Integrated Gas Sensor ZP01


ZP01-MP503 air-quality module adopts flat surface semiconductor gas sensor. The module has very high sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.

Learn More

Flat Semiconductor Integrated Gas Sensor ZP16


ZP16 air-quality module adopts flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.

Learn More

MEMS VOC Sensor Module ZM01


MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. The sensor has high sensitivity and small size, and adopts I2C digital signal output mode to facilitate the observation of multiple sensor networks. It also pre-sets a pin for alarm trigger signal output, which can be widely used in many fields such as environmental safety and portable instruments.

Learn More

Vehicle Air Quality Module ZM102


The in-vehicle air quality module is a digital, low-power, miniaturized module used in automotive air conditioners. The module uses a combination of MOX semiconductor gas sensor, MEMS manufacturing process, and high-performance microprocessor to detect the air pollution level in the external environment of the car. For example, the exhaust gas emitted by the vehicle in front can be controlled to close the intake valve of the car air conditioner, so as to achieve the purpose of keeping the air in the cabin clean. This module is a high-performance sensor module made by closely combining mature detection technology with high-quality design circuits.

Learn More

NDIR CO2 Sensor MH-Z19D


The MH-Z19D carbon dioxide gas sensor uses the principle of non-dispersive infrared (NDIR) to detect the presence of CO2 in the air, and has two types of pins and terminals. It is a high-performance sensor produced by combining mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.

Learn More

NDIR CO2 Sensor MH-Z19C


MH-Z19C NDIR infrared gas module is a common type, small size sensor, pins type or terminal type, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design.

Learn More

NDIR CO2 Sensor MH-Z19E


MH-Z19E NDIR infrared gas module is a common type, small size sensor, pins type or terminal type, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design.

Learn More

Electrochemical Formaldehyde Sensor ZE08K-CH2O


ZE08K-CH2O electrochemical chemical formaldehyde module is a universal, small Module. The use of electrochemical principles to detect CH2O in the air, which has good selectivity and stability. At the same time, it has digital output and analog voltage output for easy use. ZE08K-CH2O is a universal gas module designed to design mature electrochemical detection technology with excellent circuit design.

Learn More

Temperature and Humidity Sensor Module ZS05


ZS05 temperature and humidity module is a digital signal output temperature and humidity sensor module. It uses dedicated digital module acquisition technology to ensure high reliability and stability. ZS05 adopts standard IIC communication mode, which can be directly connected to IIC communication bus, easy to use

Learn More

Infrared Dust Sensor ZPH04


This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm).

Learn More

Infrared Dust Sensor ZPH04B


This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm).

Learn More

Laser Dust Sensor ZH07


Laser Dust sensor module ZH07 is a common type, small size sensor, using laser scattering principle to detect the dust particles in air, with good consistency and stability. It is easy to use, with UART & PWM output.

Learn More

Laser Dust Sensor ZH03B


Laser Dust sensor module is a common type, small size sensor, using laser scattering principle to detect the dust particles in air, with good selectivity and stability. It is easy to use, with serial port output & PWM output.

Learn More

Laser Dust Sensor ZH06-I


ZH06-I is a laser dust sensor that can detect PM1.0, PM2.5, PM10. The vortex fan is adopted, and the air is discharged from the side. The terminal model is 1.25T-8p.

Learn More

MEMS VOC Sensor GM-502B


MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal.

Learn More

MEMS VOC Sensor Module ZM01


MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. The sensor has high sensitivity and small size, and adopts I2C digital signal output mode to facilitate the observation of multiple sensor networks. It also pre-sets a pin for alarm trigger signal output, which can be widely used in many fields such as environmental safety and portable instruments.

Learn More

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

Still need help? Join the community

Related Links

Support

The first six FAQs. Use the search bar above to reveal more!

Is the Dust Sensor Wired when Shipped?

Laser dust is wired, infrared dust is not wired.

Can Wave Soldering Be Used for Semiconductor Sensors?

Yes, but you need to pay attention to the following points: 1. Use rosin flux with the least chlorine; 2. Speed: 1-2m/min; 3. Preheating temperature: 100±20℃; 4. Soldering temperature: 250±10℃;

All the Mc Series Products Measure Combustible Gas, What is the Difference?

MC series products are different in power supply voltage and current, their appearance and structure are also different; in addition, they are divided into two types: domestic and industrial. Industrial products require explosion-proof and the shell should be the explosion-proof structure of metallurgical powder mesh. The MC100 series is mainly used for domestic use, and the MC110 series is mainly used for industry.
SUBMIT
Security verification
%{tishi_zhanwei}%