MP-7 Flat-surfaced Semiconductor Flammable Gas Sensor

For residential and industrial CO leakage detection

Applications :

*CO alarm
*Portable co detector

Product Advantages:
  • *Low cost
  • *Compact size
  • *10 years lifetime
  • *High Sensitivity to CO
Product Description:

MP-7 adopts advanced planar construction production technics, using MOS material formed by micro AL2O3 ceramic tube and heater, electro-down-lead be fetched out, and are fixed into a metal base and cover. Adopting low and high temperature circling detection: when low temperature (VH=1.5V), it detects CO, Conductance of sensor bigger along with CO concentration in air; When high temperature(VH=5.0V), clean other gases, using simple circuit could change the conductance, change it to be output signal which relatively to the gas concentration.

Technical Parameters:
Model MP-7
Sensor Type Flat surfaced
Standard Encapsulation Metal cap
Target Gas CO gas
Detection range 50-1000ppm CO
Standard Circuit Conditions Loop Voltage Vc ≤10V DC
Heater Voltage VH 5V±0.1V AC or DC(high temp.) 1.5V±0.1V AC or DC(low temp.)
Heating time TL 60S±1S(high temp.) 90S±1S(low temp.
Load Resistance RL Adjustable
Sensor character under standard test conditions Heater Resistance RH 105Ω±10Ω (room temp.)
Heater consumption PH ≤240mW
Sensitivity S Ro(in air)/Rs(100ppm CO)≥3
Output voltage VS 2.5V~4.3V (in 100ppm CO)
Concentration Slope α ≤0.6(R300ppm/R50ppm CO)
Standard test conditions Operation Temp. Tao -10℃~50℃
Storage Temp. Tas -20℃~70℃
Relative Humidity RH <95%RH
O2 content 21%(not less than 18%) O2 concentration effects initial value, sensitivity and repeatability.
Preheat time Not less than 48 hours
Lifespan 10 years
The Latest Manual

Please send us your questions or inquiries via the form below and we will get back to you within 24 hours.

Cannot find what you are looking for?

Write an email to us to consult about your special project, we will assist you to realize your dream product to reality.

Home Tel Mail Inquiry