Residual Chlorine Sensor MW-RCl101


+
  • MW-RCl101.png

Summary:

MW-RCl101 sensor is a polarographic residual chlorine water quality detection sensor
The residual chlorine molecules in the measured solution pass through the selective membrane of the sensor and reach the cathode surface of the electrode. Under the polarization of the polarization potential, the residual chlorine molecules get electrons and are reduced, and the anode loses electrons and is oxidized. At the same time, a current signal is generated, and the magnitude of the signal is proportional to the residual chlorine concentration. The residual chlorine concentration is judged by detecting the magnitude of the current signal during the electrode reaction process.

Feature:

* High sensitivity, low power consumption
* Excellent stability
* Temperature Compensated, Excellent Linear Output
* Provide serial port (UART), PWM waveform and other output methods
* Long lifespan
* Anti-water vapor interference, no poisoning.

Share To:


APPLICATION

Water Quality

As we all know, there are a lot of pollutants in swimming pool water, and the polluted water can easily become a source of transmission of some diseases, causing various discomforts to swimmers. Therefore, the use of online water quality monitoring equipment for real-time monitoring and strict filtration and disinfection of pool water is an important link to prevent the spread of various diseases, protect swimmers and improve the quality of pool water.

MORE +

Pollution Source Detection

The septic tank is a device for processing feces and filtering. The principle is that the solidified material is decomposed at the bottom of the pool, and the hydrated objects in the upper layer enter the pipeline and flow away, preventing the pipeline from clogging and providing solidified objects (feces and other garbage)with enough time to hydrolyze.

MORE +

Didn't Find Your Tarket Application?
Winsen offers tailor-made gas sensor solutions for your industry

Contact us

PARAMETER

Specification Product Size

Technical Data Sheet

Model No. MW-RCl101
Measuring range 0~20 mg/L
Temperature applicable range 0~60  ℃
Min division value 0.01 mg/L
Response time(T90) <90 s
Temperature Compensation Without Temperature Compensation
Zero output < 0.005 μA
Calibration method Laboratory comparison method
Accuracy ±0.0 1 mg/L
Sensitivity 8-17.5nA/mg/L(HClO)
Interface 2 positive and negative connecting wires

Winsen

Free Guide! Learn the Parameter Differences of Similar Sensors

Wondering how to find the most suitable one for you out of so many sensors? Download our free guide to learn the comparison table of technical parameters. 

DOWNLOAD GUIDE

RELATED PRODUCTS

As a pioneer in gas sensor based solutions with the advanced processes, technologies and products, Winsen offers a wide range of gas sensors:

RELATED PRODUCTS

As a pioneer in gas sensor based solutions with the advanced processes, technologies and products, Winsen offers a wide range of gas sensors:

WHY CHOOSE WINSEN

Professional and Trustworthy

Brand Precipitation

Focus on Sensor Field

115 +

National Patents

International Advanced Technology

300 +

Detection Objects

More Than 300 Kinds


Production Process

Excellence Products 

60 +

Provide 60+ Countries with Solutions

Serve the Global Market

300 +

Cooperate with 300+ well-known Enterprises

More Customer’s Choice

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

Still need help? Join the community

FAQ

Here you can learn about the selection guide, common technical problems, packaging, transportation, MOQ, delivery time, etc.

Factory or Trade Company?

Winsen is a factory with over 30,000 square meters area and 500+ production machines which is focusing on sensors development&manufacturing. It has strong R&D strength with more than 100 R&D personnel.

How long is the delivery time?

1-7 days after received payment

What is your warranty term?

The warranty period is one year from the date of shipment. If the appearance of the product is not damaged, it can be returned after confirmation. For damage not caused by Winsen, the customer shall bear all maintenance costs.

Send your inquiry today

Security verification
Submit now!
SUBMIT
Security verification
%{tishi_zhanwei}%

We will send the manual to your email.

Please leave your email address.

SUBMIT
%{tishi_zhanwei}%