









Residual Chlorine Sensor MW-RCl101
Summary:
MW-RCl101 sensor is a polarographic residual chlorine water quality detection sensor
The residual chlorine molecules in the measured solution pass through the selective membrane of the sensor and reach the cathode surface of the electrode. Under the polarization of the polarization potential, the residual chlorine molecules get electrons and are reduced, and the anode loses electrons and is oxidized. At the same time, a current signal is generated, and the magnitude of the signal is proportional to the residual chlorine concentration. The residual chlorine concentration is judged by detecting the magnitude of the current signal during the electrode reaction process.
Feature:
* High sensitivity, low power consumption
* Excellent stability
* Temperature Compensated, Excellent Linear Output
* Provide serial port (UART), PWM waveform and other output methods
* Long lifespan
* Anti-water vapor interference, no poisoning.
APPLICATION
As we all know, there are a lot of pollutants in swimming pool water, and the polluted water can easily become a source of transmission of some diseases, causing various discomforts to swimmers. Therefore, the use of online water quality monitoring equipment for real-time monitoring and strict filtration and disinfection of pool water is an important link to prevent the spread of various diseases, protect swimmers and improve the quality of pool water.
The septic tank is a device for processing feces and filtering. The principle is that the solidified material is decomposed at the bottom of the pool, and the hydrated objects in the upper layer enter the pipeline and flow away, preventing the pipeline from clogging and providing solidified objects (feces and other garbage)with enough time to hydrolyze.
Didn't Find Your Tarket Application?
Winsen offers tailor-made gas sensor solutions for your industry
PARAMETER
Technical Data Sheet
Model No. | MW-RCl101 |
Measuring range | 0~20 mg/L |
Temperature applicable range | 0~60 ℃ |
Min division value | 0.01 mg/L |
Response time(T90) | <90 s |
Temperature Compensation | Without Temperature Compensation |
Zero output | < 0.005 μA |
Calibration method | Laboratory comparison method |
Accuracy | ±0.0 1 mg/L |
Sensitivity | 8-17.5nA/mg/L(HClO) |
Interface | 2 positive and negative connecting wires |

Free Guide! Learn the Parameter Differences of Similar Sensors
Wondering how to find the most suitable one for you out of so many sensors? Download our free guide to learn the comparison table of technical parameters.
RELATED PRODUCTS
As a pioneer in gas sensor based solutions with the advanced processes, technologies and products, Winsen offers a wide range of gas sensors:
RELATED PRODUCTS
As a pioneer in gas sensor based solutions with the advanced processes, technologies and products, Winsen offers a wide range of gas sensors:
WHY CHOOSE WINSEN
Professional and Trustworthy
Brand Precipitation
Focus on Sensor Field
National Patents
International Advanced Technology
Detection Objects
More Than 300 Kinds
Production Process
Excellence Products
Provide 60+ Countries with Solutions
Serve the Global Market
Cooperate with 300+ well-known Enterprises
More Customer’s Choice
How to choose the right sensor for your project?
We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.
Here you can learn about the selection guide, common technical problems, packaging, transportation, MOQ, delivery time, etc.
Factory or Trade Company?
How long is the delivery time?
What is your warranty term?