Infrared Induction Appliance

Human body induction empower home appliances with intelligence.In the field of human body induction, the main application fields of Winsen sensors are toys, burglar alarms, induction doors, induction lamps, induction switches, etc.

Put your home into automatic mode

gas sensor for Infrared Induction Appliance

Smart homes and smart appliances have become the center of attention. As the most frequently interacted and most closely connected part of the smart home, smart home appliances are expanding their scale in the retail market at an extremely fast growth rate.

From smart door locks, smart security, smart TVs to smart switches, smart toilets, smart showers and other body induction products are blooming everywhere, the golden age of smart home appliances has arrived. Various smart home appliances in life are no longer information islands, but are gradually forming a scene-based system to form a complete smart home system.

In this ecosystem, home appliances can be interconnected to achieve remote human-computer interaction and control, and can provide users with safer, more comfortable, and more convenient personalized services by collecting and analyzing user behavior data. Technology is a key factor affecting the development of software and hardware in the entire ecosystem and the effect of user experience. Among them, sensors, as the underlying basic components, are an important basis for data acquisition, data collection, and accurate personalized services.

Let the light turn on with you

Infrared automatic induction light and induction switch can sense infrared rays of the human body, the light is on when people come, and the light is off when people leave, realizing automatic lighting. Some use LEDs as light sources to save electricity to the maximum extent; some use battery power without wiring, and can be conveniently placed in places such as entrances, bathrooms, corridors and other places that require temporary lighting. Induction switches can also be used to connect lamps to achieve automatic lighting.

Induction switch

The product is applied to high-performance infrared detectors, which use pyroelectric infrared sensors to detect infrared radiation of moving human bodies. As long as the human body walks within its detection range, the infrared automatic switch will generate an electrical signal to start the load.

Induction lamp

sensor for induction lamp

Compared with sound and light control products, pyroelectric infrared sensors have better anti-interference effect. It will not be disturbed by sound, and it only senses the temperature of the human body. The light is on when people come and the light is off when people leave. That is, the sensitivity in summer will be reduced a little. The closer the temperature of the environment is to that of the human body, the lower the sensitivity.Normal sensing distance is about 5-8m.

Infrared Induction Appliance

Watch over your home and prevent outsiders from snooping

sensor for Infrared Induction Appliance

Smart Security - Burglar Alarm, Wireless Smart Infrared Detection Alarm. It uses advanced signal analysis and processing techniques. When an intruder passes through the detection area, the detector will automatically detect the movement of the human body in the area. If there is dynamic movement, it will send an alarm signal to the control host. The product is suitable for the safety protection of family residential areas, real estate villas, factories, shopping malls, warehouses, office buildings and other places.

Smart appliance

RELATED PRODUCTS

Thermopile Sensor MRT-311S


MRT-311S thermopile sensor is based on MEMS technology, consists of hundreds of thermocouples connected in series. Using Seebeck principle, when there is a temperature difference between the target and the environment, the sensor gives the corresponding voltage output, therefore detecting the existence of the target or the temperature of the target.

Learn More

Thermopile Sensor MRT-313


MRT-313 sensor is a thermopile temperature sensor, which is formed by connecting hundreds of pairs of thermocouples in series based on MEMS technology. According to Seebeck's principle, when there is a temperature difference between the target and the environment, the sensor outputs a corresponding voltage to detect the presence of the target or the temperature of the target.

Learn More

Thermopile Sensor MRT-511


MRT-511 sensor is a thermoelectric reactor temperature sensor, based on MEMS process, hundreds of thermocouples are connected in series. Using Seebeck's principle, when there is a temperature difference between the target and the environment, the sensor outputs the corresponding voltage, so as to detect the presence of the target or the temperature of the target.

Learn More

Infrared Pyroelectric Sensor ZRD-09


ZRD-09 Pyroelectric infrared sensor module adopts high performance PIR sensor, Fresnel lens, Pyroelectric dedicated chip and High-performance voltage regulator circuit. It has the features, as low static power consumption, wide operating voltage, and high sensitivity. It has repeatable and non-repeatable trigger terminal to be selected, thus this module can be set according to the actual demand, convenient to use.

Learn More

Infrared Pyroelectric Sensor RD623


Pyroelectric Infrared Sensor detects the infrared radiation by using the temperature-dependent feature. It suppresses the interference caused by temperature change adopts the method of dual sensing elements complementary which improves the stability of the sensor. This PIR sensor can be widely used in safety device, burglar alarm, automatic door, auto light control and intelligent toys.

Learn More

Infrared Pyroelectric Sensor RD624


Pyroelectric Infrared Sensor detects the infrared radiation by using the temperature-dependent feature. It suppresses the interference caused by temperature change, adopts the method of dual sensing elements complementary which improves the stability of the sensor. This PIR sensor can be widely used in safety device, burglar alarm, automatic door, auto light control and intelligent toys.

Learn More

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

BROWSE ALL

PRODUCTS

Still need help? Join the community

Related Links

Support

The first six FAQs. Use the search bar above to reveal more!

Is the Dust Sensor Wired when Shipped?

Laser dust is wired, infrared dust is not wired.

What Are the Precautions for Manual Soldering of Semiconductor Sensors?

1. Flux: rosin flux with the least chlorine; 2. Constant temperature soldering iron; 3. Temperature: 250℃; 4. Time: no more than 3 seconds.

Can Wave Soldering Be Used for Semiconductor Sensors?

Yes, but you need to pay attention to the following points: 1. Use rosin flux with the least chlorine; 2. Speed: 1-2m/min; 3. Preheating temperature: 100±20℃; 4. Soldering temperature: 250±10℃;
SUBMIT
Security verification
%{tishi_zhanwei}%