Cleaning Appliance

Cleaning appliances such as washing machines and sweeping robots in the lazy economy have fast product upgrade and functional integration has become the general trend. The addition of Winsen technology dust sensors, VOC sensors, temperature sensors etc., brings more possibilities for the performance upgrade of product function innovation.

Eyes of sweeping robots—infrared sensors

sensor for Cleaning Appliance

The sweeping robot is equipped with infrared sensors. When an obstacle is detected, the sweeping robot will automatically decelerate to avoid touching the obstacle.There are generally more than a dozen sensors on the body of high-end sweeping robots. They are like our eyes and ears, avoiding various obstacles and preventing repeated cleaning and other situations. And low-end products often shrink on the sensor, so that the cleaning robot cannot accurately understand the room situation, thus reducing the cleaning efficiency. Without the sensors, the sweeping robot might not even be able to recharge itself.

Temperature sensor ensures motor safety

In order to prevent the motor from overheating due to continuous operation of the sweeping robot, which leads to the burning of the circuit, two temperature sensors will be installed on the circuit board of the sweeping robot. When the temperature drops to a certain level, another temperature sensor sends a signal to the controller, and the controller controls the cleaning robot to continue to work.

"Self-managing" dust bins

When the dust box is full, it will prompt the user to dump it. This is because the dust sensor in the dust box is in play. When the height of the garbage in the dust box reaches the height of the sensor. It will cause the sensor to transmit the signal to the downstream components such as the controller, and the end user will receive the alarm signal on his mobile phone.

In addition, the dust box sensor can be used to sense whether the dust box is in place. After the dust box is in place, the sensor will be turned off and the device can work normally, avoiding the idling of the sweeping robot without installing the dust box device and protect the core fan of the sweeping robot from damage.

Smart appliance

RELATED PRODUCTS

Infrared Dust Sensor ZPH02


This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm). Before delivery, the sensor has been aged, debugged, calibrated and has good consistency and high sensitivity.

Learn More

Laser Dust Sensor ZH03B


Laser Dust sensor module is a common type, small size sensor, using laser scattering principle to detect the dust particles in air, with good selectivity and stability. It is easy to use, with serial port output & PWM output.

Learn More

MEMS VOC Sensor GM-502B


MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal.

Learn More

Temperature and Humidity Sensor Module ZS05


ZS05 temperature and humidity module is a digital signal output temperature and humidity sensor module. It uses dedicated digital module acquisition technology to ensure high reliability and stability. ZS05 adopts standard IIC communication mode, which can be directly connected to IIC communication bus, easy to use

Learn More

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

Still need help? Join the community

Related Links

Support

The first six FAQs. Use the search bar above to reveal more!

Is the Dust Sensor Wired when Shipped?

Laser dust is wired, infrared dust is not wired.

How to Install and Place the Infrared Dust Sensor?

It must be installed vertically. Keep away from artificial air flow such as fans. When used in air purifiers, the front and rear of the fan cannot be installed. Optionally install it on one side of the shell, but keep vents on the shell to ensure that the external air can diffuse in.

Can the Two Voltages of Mq-7 Exist All the Time, or Do They Need to Be Powered Alternately? if It is an Alternate Power Supply, What is the Appropriate Power Supply Time?

It requires alternate power supply. Please check the information on the product manual. This sensor is powered by 1.5V and 5V alternately. The low temperature and low voltage (1.5V) state can detect CO, and the high voltage (5V) is the desorption process. The recommended 5V voltage duration is 60s, 1.5V voltage duration is 90s to alternately supply power. Since it is a desorption process at 5V, it is normal for the voltage to drop when CO is 150ppm.
SUBMIT
Security verification
%{tishi_zhanwei}%