Disinfection Product

Winsen Technology has been focusing on gas sensor research for many years, and has a variety of ozone detection solutions, which can meet the application needs of different products in different environments.

Ozone sensor: ensure the quality of the disinfection cabinet

As a popular household appliance, disinfection cabinets use the strong oxidizing properties of ozone for disinfection. As a high-efficiency broad-spectrum gas disinfectant without residual pollution, ozone has special advantages over commonly used disinfectants in the food industry (such as peracetic acid, potassium permanganate, formaldehyde, sulfur dioxide).No residual pollution occurs, and no ventilation is required after disinfection.Therefore, ozone is widely used in disinfection cabinets.However, ozone leakage will endanger human health, and the allowable threshold value in the air at the job site is 0.2mg/m3. Therefore, the ozone type disinfection cabinet needs to maintain the concentration of ozone in the cabinet while ensuring that the ozone does not leak to ensure the disinfection effect.In order to better monitor the level of ozone concentration, the ozone sensor is produced, which solves the major problem.

Smart appliance

RELATED PRODUCTS

Electrochemical Ozone Sensor ZE25-O3


ZE25-O3 is a general-purpose and miniaturization electrochemical Ozone detection module. It utilizes electrochemical principle to detect ozone in air which makes the module with high selectivity and stability. It is a combination of mature electrochemical detection principle and sophisticated circuit design.

Learn More

Electrochemical Ozone Sensor ME2-O3


ME2-O3 electrochemical gas sensor is fuel cell type, which utilizes the electrochemical oxidation process of O3 gas on the working electrode. The current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current. 

Learn More

Electrochemical Ozone Sensor ME3-O3


ME3-O3 electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current.

Learn More

Electrochemical Ozone Sensor ME4-O3-E4


ME4-O3-E4 ozone gas sensor is constant potential electrolysis type. Oxidation-reduction with ozone and oxygen take place respectively on the working electrode and on the counter electrode. The process releases electric charge to current that is in direct proportion to the ozone concentration. The fourth auxiliary electrodes is used to compensate the zero current, characteristic of strong signal level and low zero current.

Learn More

Electrochemical Ozone Sensor ZE14-O3


ZE14-O3 is a general-purpose and miniaturization electrochemical Ozone detection module. It utilizes electrochemical principle to detect ozone in air which makes the module with high selectivity and stability. It is a combination of mature electrochemical detection principle and sophisticated circuit design.

Learn More

Electrochemical Ozone Sensor ZE27-O3


ZE27-O3 electrochemical ozone module is a general-purpose and miniaturized module. The use of electrochemical principles to detect the ozone gas in the air, which has good selectivity and stability. The built -in temperature sensor can be compensated by temperature; it has digital output for easy use. The ZE27-O3 is a close combination of mature electrochemical detection technology with the excellent circuit design, and the universal gas module designed and manufactured.

Learn More

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

Still need help? Join the community

Related Links

Support

The first six FAQs. Use the search bar above to reveal more!

What is the Difference Between Semiconductor Sensors and Electrochemical Sensors?

There is no good linear correspondence between the gas concentration and voltage of the semiconductor sensor, and it is generally only used for fixed-point calibration products; there is a good linear correspondence between the gas concentration and the output current of the electrochemical sensor, and can be made into quantitative detection products.

What Are the Precautions for Manual Soldering of Semiconductor Sensors?

1. Flux: rosin flux with the least chlorine; 2. Constant temperature soldering iron; 3. Temperature: 250℃; 4. Time: no more than 3 seconds.

Can Wave Soldering Be Used for Semiconductor Sensors?

Yes, but you need to pay attention to the following points: 1. Use rosin flux with the least chlorine; 2. Speed: 1-2m/min; 3. Preheating temperature: 100±20℃; 4. Soldering temperature: 250±10℃;
SUBMIT
Security verification
%{tishi_zhanwei}%