Oxygenator

Flow sensor used in oxygenator

Flow sensor used in oxygenator

The oxygenator uses molecular sieve physical adsorption and desorption technology to adsorb nitrogen in the air and obtain high-purity oxygen after purification. The current oxygen therapy and oxygen health care equipment is roughly divided into health care oxygen machines with an oxygen concentration of 30%-60%, molecular sieve medical oxygen generators with an oxygen concentration of more than 90%, oxygen cylinder with higher oxygen concentration,and portable oxygen cylinders.

These devices basically rely on oxygen masks or nasal oxygen tubes to inhale oxygen, which belong to open oxygen inhalation, that is, when a person inhales a breath, in addition to the supplied oxygen, some air (21% oxygen concentration) is also inhaled, and the oxygen concentration that actually reaches the lungs is the oxygen concentration after mixing the air. In oxygen therapy and oxygen rehabilitation, too little oxygen inhalation will not achieve convalescent effect, and excessive oxygen inhalation will cause harm, so it is very important to control the oxygen flow.Gas flow sensors used in oxygen generator must be able to accurately measure ultra-low flow so that they can be used to detect when the patient is exhaling, when the air flow should be reduced, allowing the patient to exhale easily and comfortably.

F1031V-2 micro-flow sensor

F1031V-2 micro-flow sensor

The F1031V-2 flow sensor uses a new generation of MEMS sensor chip technology to detect the flow of the gas medium in the flow channel using the principle of thermodynamics, with good accuracy and repeatability.There is a built-in temperature sensor, each of which has a proprietary temperature compensation calibration function, and has a linear analog voltage output, which is convenient to use.

When the flow sensor is applied to the oxygen generator, it is mainly used to measure the flow of oxygen entering the system to ensure sufficient air supply. The gas flow sensor used in the oxygen generator must be able to measure ultra-low flow. By judging the breathing rhythm of the patient during sleep, according to the breathing speed, control the intake pump, and adjust the size and speed of the ventilation volume to keep the patient's breathing and intake frequency consistent, to provide sufficient oxygen concentration in the lungs.

There are many applications of flow sensors in the medical field. From hospital bed oxygen supply, floor pipeline oxygen supply to oxygen generators, ventilators, anesthetics and other medical equipment, the support of flow sensors is necessary. In addition, flow sensors play an important role in industrial production, scientific experiments, product quality control, production efficiency improvement, and energy conservation.

Health care

RELATED PRODUCTS

MEMS Flow Sensor F1031


F1031 micro flow sensor adopts thermodynamic principle to detect the gas flow, and it has high accuracy and good repeatability. The built-in temperature sensor makes the product has the function of professional temperature compensation calibration. At the same time, the output is linear analog voltage which is convenient to use.

Learn More

MEMS Flow Sensor F1031V-2


F1031V-2 micro flow sensor adopts thermodynamic principle to detect the gas flow, and it has high accuracy and good repeatability. The built-in temperature sensor makes the product has the function of professional temperature compensation calibration. At the same time, the output is linear analog voltage which is convenient to use.

Learn More

MEMS Flow Sensor F1032


The F1032 flow sensor uses the thermodynamic principle to detect the flow of the gas medium in the flow channel, and has good accuracy and repeatability. Built-in temperature sensor, each with proprietary temperature compensation calibration; at the same time has a linear analog voltage output, easy to use.

Learn More

MEMS Gas Flow Sensor F1012


F1012 micro gas flow sensor adopts thermodynamic principle to detect the gas flow, and it has high accuracy and good repeatability. The built-in temperature sensor makes the product has the function of professional temperature compensation calibration. At the same time, the output is linear analog voltage which is convenient to use.

Learn More

MEMS Flow Sensor F1013


F1013 micro flow sensor adopts thermodynamic principle to detect the gas flow, and it has high accuracy and good repeatability. The built-in temperature sensor makes the product has the function of professional temperature compensation calibration. At the same time, the output is linear analog voltage which is convenient to use.

Learn More

MEMS Flow Sensor F1022


F1022 micro flow sensor adopts thermodynamic principle to detect the gas flow, and it has high accuracy and good repeatability. The built-in temperature sensor makes the product has the function of professional temperature compensation calibration. At the same time, the output is linear analog voltage which is convenient to use.

Learn More

How to choose the right sensor for your project?

We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.

BROWSE ALL

PRODUCTS

Still need help? Join the community

Related Links

Support

The first six FAQs. Use the search bar above to reveal more!

Can the Two Voltages of Mq-7 Exist All the Time, or Do They Need to Be Powered Alternately? if It is an Alternate Power Supply, What is the Appropriate Power Supply Time?

It requires alternate power supply. Please check the information on the product manual. This sensor is powered by 1.5V and 5V alternately. The low temperature and low voltage (1.5V) state can detect CO, and the high voltage (5V) is the desorption process. The recommended 5V voltage duration is 60s, 1.5V voltage duration is 90s to alternately supply power. Since it is a desorption process at 5V, it is normal for the voltage to drop when CO is 150ppm.

What is the Difference Between Semiconductor Sensors and Electrochemical Sensors?

There is no good linear correspondence between the gas concentration and voltage of the semiconductor sensor, and it is generally only used for fixed-point calibration products; there is a good linear correspondence between the gas concentration and the output current of the electrochemical sensor, and can be made into quantitative detection products.

What Are the Precautions for Manual Soldering of Semiconductor Sensors?

1. Flux: rosin flux with the least chlorine; 2. Constant temperature soldering iron; 3. Temperature: 250℃; 4. Time: no more than 3 seconds.
SUBMIT
Security verification
%{tishi_zhanwei}%