









Cleaning Appliance
Cleaning appliances such as washing machines and sweeping robots in the lazy economy have fast product upgrade and functional integration has become the general trend. The addition of Winsen technology dust sensors, VOC sensors, temperature sensors etc., brings more possibilities for the performance upgrade of product function innovation.
Eyes of sweeping robots—infrared sensors
The sweeping robot is equipped with infrared sensors. When an obstacle is detected, the sweeping robot will automatically decelerate to avoid touching the obstacle.There are generally more than a dozen sensors on the body of high-end sweeping robots. They are like our eyes and ears, avoiding various obstacles and preventing repeated cleaning and other situations. And low-end products often shrink on the sensor, so that the cleaning robot cannot accurately understand the room situation, thus reducing the cleaning efficiency. Without the sensors, the sweeping robot might not even be able to recharge itself.
Temperature sensor ensures motor safety
In order to prevent the motor from overheating due to continuous operation of the sweeping robot, which leads to the burning of the circuit, two temperature sensors will be installed on the circuit board of the sweeping robot. When the temperature drops to a certain level, another temperature sensor sends a signal to the controller, and the controller controls the cleaning robot to continue to work.
"Self-managing" dust bins
When the dust box is full, it will prompt the user to dump it. This is because the dust sensor in the dust box is in play. When the height of the garbage in the dust box reaches the height of the sensor. It will cause the sensor to transmit the signal to the downstream components such as the controller, and the end user will receive the alarm signal on his mobile phone.
In addition, the dust box sensor can be used to sense whether the dust box is in place. After the dust box is in place, the sensor will be turned off and the device can work normally, avoiding the idling of the sweeping robot without installing the dust box device and protect the core fan of the sweeping robot from damage.
RELATED PRODUCTS
Electrochemical Integrated Gas Sensor ZE12A
ZE12A is a general-purpose and high-performance electrochemical module. It can detect the CO, SO2, NO2, O3 based on electrochemical principle, it has good selectivity and stability. A temperature sensor is built-in for temperature compensation. It has the digital output and analog voltage output at the same time which facilities the usage and calibration and shorten the development period. It is a combination of mature electrochemical detection principle and sophisticated circuit design, to meet customers’ different detection needs.
Flat Semiconductor Integrated Gas Sensor ZP01
ZP01-MP503 air-quality module adopts flat surface semiconductor gas sensor. The module has very high sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.
Flat Semiconductor Integrated Gas Sensor ZP16
ZP16 air-quality module adopts flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.
The MH-Z19D carbon dioxide gas sensor uses the principle of non-dispersive infrared (NDIR) to detect the presence of CO2 in the air, and has two types of pins and terminals. It is a high-performance sensor produced by combining mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
MH-Z19C NDIR infrared gas module is a common type, small size sensor, pins type or terminal type, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design.
MH-Z19E NDIR infrared gas module is a common type, small size sensor, pins type or terminal type, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature infrared absorbing gas detection technology, precision optical circuit design and superior circuit design.
Electrochemical Formaldehyde Sensor ZE08K-CH2O
ZE08K-CH2O electrochemical chemical formaldehyde module is a universal, small Module. The use of electrochemical principles to detect CH2O in the air, which has good selectivity and stability. At the same time, it has digital output and analog voltage output for easy use. ZE08K-CH2O is a universal gas module designed to design mature electrochemical detection technology with excellent circuit design.
Temperature and Humidity Sensor Module ZS05
ZS05 temperature and humidity module is a digital signal output temperature and humidity sensor module. It uses dedicated digital module acquisition technology to ensure high reliability and stability. ZS05 adopts standard IIC communication mode, which can be directly connected to IIC communication bus, easy to use
This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm).
This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm).
Laser Dust sensor module ZH07 is a common type, small size sensor, using laser scattering principle to detect the dust particles in air, with good consistency and stability. It is easy to use, with UART & PWM output.
Laser Dust sensor module is a common type, small size sensor, using laser scattering principle to detect the dust particles in air, with good selectivity and stability. It is easy to use, with serial port output & PWM output.
ZH06-I is a laser dust sensor that can detect PM1.0, PM2.5, PM10. The vortex fan is adopted, and the air is discharged from the side. The terminal model is 1.25T-8p.
MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. Use simple circuit can convert the change of conductivity of the gas concentration corresponding to the output signal.
MEMS combustible gas sensor is using MEMS micro-fabrication hot plate on a Si substrate base, gas-sensitive materials used in the clean air with low conductivity metal oxide semiconductor material. When the sensor exposed to gas atmosphere, the conductivity is changing as the detected gas concentration in the air. The higher the concentration of the gas, the higher the conductivity. The sensor has high sensitivity and small size, and adopts I2C digital signal output mode to facilitate the observation of multiple sensor networks. It also pre-sets a pin for alarm trigger signal output, which can be widely used in many fields such as environmental safety and portable instruments.
How to choose the right sensor for your project?
We have 17 sensor series, 200+ categories, and 300+ detection objects for gas detection. Such as CO, CO2, VOC, PM2.5, CH4, LPG and so on. In particular, we also have MEMS sensors. According to your industry application, gas principle, power consumption, accuracy, and range requirements, and we can select a specific model for you. You can also use the product filter below to choose a suitable product, or choose online serivce.
Related Links
The first six FAQs. Use the search bar above to reveal more!
Is the Dust Sensor Wired when Shipped?
How to Install and Place the Infrared Dust Sensor?
Can the Two Voltages of Mq-7 Exist All the Time, or Do They Need to Be Powered Alternately? if It is an Alternate Power Supply, What is the Appropriate Power Supply Time?